In Days Of Old When Things Where Done By Hand – This Is How It Was Done…
How To Remove A Screw With A Stripped Head
You know how easy it is to strip the head on a screw…
How To Wire A 3-Way Switch
It’s Just Slightly More Complicated Than A Standard Switch…
Only The Best Painting Tools Will Do
A survey Done For This Article Found These To Be The Best DIY Painting Tools…
How To Clean Up Rusty / Dirty Tools Or Parts
. One Way Is To Spray A Fine Abrasive On Them In the video below Eddie uses a soda blaster. It’s actually a small sand blaster gun. You can put fine sand or baking soda or walnut shells and probably other things in the hopper that get shot out with the stream of compressed air.…
How To Sharpen Your Forstner Wood Drill Bits
These Drill Bits Can Be Tricky To Sharpen Because Of The Multi Cutting Faces…
How A Ram Pump Works
No External Power Required – Just A Small Head Of Water…
An Axe Like No Other
An Extremely Well Made Axe Is A Pleasure To Use…
How To Create A Fixed Eye In 3/8 Amsteel Blue
An Eye On The End Of A Rope Can Have Many Uses…