.

The Tub Is Quite Simple To Build

This simple tub can be built with a minimum of woodworking tools, and building materials are available from your local lumberyard.

The tub can be built to any practical size and height, from a small single person configuration which uses a minimum amount of water and heats quickly, to a large family size tub.

The tub is portable depending on size, it can be used indoors or out, and conventional heat and jetting systems can be installed as with any tub.

This tub is constructed from High Density Overlay (HDO) plywood.

The hard overlay provides a relatively maintenance free waterproof surface on both sides.
Flexible sealant can be applied as needed to joints and corners and under the perimeter cap molding.

Exterior and marine grades of ply may be used, especially if coated and sealed with epoxy and/or fiberglass cloth.

Quality hardwood ply can be used without fiberglass sheathing and finished natural.

Various heaters and jetting options are available the same as with other hot tubs.

Source Article and image source.