26 Comments

1. Dan Yarbro - October 31, 2014 said:

   Could do it if you have a vise to hold
2. Jesse Miller - November 28, 2014 said:

   I can square broach but not drill
3. Josh Rell - December 3, 2014 said:

   Yes yes i can
4. Josh Plumeri - December 8, 2014 said:

   Travis Westerkamp Kev J Gill
5. GARY ROSIMINI - December 9, 2014 said:

   Paul DeSilva I don’t believe that.
6. Nick D'Alonzo - December 10, 2014 said:

   Why would you hear the object you need to shrink.
7. Nick D'Alonzo - December 10, 2014 said:

   Heat*
8. Justin Chaplin - December 23, 2014 said:

   Cool, but he didn’t drill a square hole. He drilled a round hole and filed it square.
9. Tom Schuler - December 26, 2014 said:

   It’s called a broach. And a punch press is faster.
10. Andy Davis - December 29, 2014 said:

    Uh… that is not drilling a square hole.
11. Tom Wensley - December 30, 2014 said:

    you mean broaching? never been done before!
12. Darrell Matthews - December 31, 2014 said:

    Piece of cake
13. Jim Davis - January 2, 2015 said:

    you could have made a drift and heated the part and drifted the hole!
14. Travis Penwell - January 4, 2015 said:

    Well ive got a 90 ton punch at the shop, can do that in under 2mins. (Setup and all)
15. Stephen Mcmanus - January 4, 2015 said:

    Nice
16. Chuck Fritts - January 4, 2015 said:

    Justin Ellis George Long
17. Levi Beermann - January 7, 2015 said:

    Looks and I assume works just like a keyhole cutter
18. Wayne Nosala - January 11, 2015 said:

    Nice Broach, All you need is drill a hole close to size, maybe a tad bigger, And press that little guy through, no biggy 🙂
19. Dan Winkler - January 12, 2015 said:

    Screw that!

    Drill a round hole and press in an insert.
20. Eric Flores - January 18, 2015 said:

    Yup just use my water jet way cleaner to
21. Chad Fortin - January 20, 2015 said:

    Eric Albee check this out
22. Marc Bublitz - January 21, 2015 said:

    Nope. And I can’t lay an egg, either.
23. Cliff Evans - January 21, 2015 said:

    I’ve used them a lot in the past they work well!
24. Mark - February 3, 2015 said:

    He is running that drill bit way too fast!!! I bet you he burns up a hell of a lot of drill bits that way!
25. Jay - February 11, 2015 said:

    You could tell the guy was an idiot when you saw him smoke that drill bit. Holly cow! TURN THE SPEED DOWN, MORON!
26. DFIII - February 26, 2015 said:

    Summer teeth…had to laugh at that but def not a laughing matter as I have had the unfortunate experience of having a vise explode. Busted my eye socket pretty bad. Use caution when ever using your vise as a press.

Comments are closed.