.
Want To Know The Best Way Co Cut A Straight Line Withe A Circular Saw?
You need to use a jig and the best one is pretty simple to make. Anyone can do it. Make several different lengths while you are at it.
My most used one is about 4 feet long and I use it all the time on the job to cut doors to length or to cross cut sheet goods.
If you don’t have a table saw – a 8′ long jig is good for ripping sheets of plywood to length.
.
The video on the next page shows you how to make one.
.
[nextpagelink][/nextpagelink]
Pages: 1 2
I’ve used this technique for many years. It works great and is also easier to cut whole sheets of plywood than struggling with a table saw.
Well I do not know how else you would cut a straight line with a hand saw, unless you had a guide to do it with!!!
Made one a few days ago.
2-4″ rigid foam insulation and that jig and you have a cheep easy panel saw. I’ve built hundreds of cabinets in driveways that way.
Ive got an eight ft. And a four ft.
Or buy a track saw
Tony Panici joey skubby made this video
Real funny Adam Post I invented this in 1875
This is a very old and often used technique. Simple quick and inexpensive.
Easiest jig to make!
I don’t know why I’ve never made one of these. I’ll do so this weekend.
Amazing alright!!!! Amazing how he took two minutes worth of information and made a 9+ minutes video.
…buy a Festool.
Not amazed
EIGHTEEN 75??? Good going old timer…!!
I own a track saw now but used this technique for years.
Damn I’m getting old^