.
Have You Heard Of A Level 5 Finish?
There is a level of finish that most drywall tapers never get to in the average home — It’s called a level-5 finish.
You might want to go the extra mile if you have high-gloss paint or direct sunlight, conditions that amplify imperfections in your walls.
Once you've done a normal, high-quality taping job, these are the 6 steps to get to level 5 – this high quality wall finish:
1. Sand
2. Remove dust
3. Thin all-purpose compound with water
4. Roll on compound over the entire wall
5. Remove compound from the wall
6. Give a quick final sanding
.
See How It's Done In The Video
.
Next Page »
It’s not a butt joint it’s called a flat !
If im not mistaken, this is called a smooth coat. ive seen it done with a 12 inch taping knife where the smooth the mud on and take it right back off giving the whole wall the same look and feel
If you cant figure it out, hit me up!
Rookie !!!!